Blog

Current & Pending MVT Gear

gear-logo3

Here at Max Velocity Tactical we are making gear that has been designed to fill your needs, and follows the MVT Gear Philosophy, which can be read about in more detail HERE.


Quick Summary from that linked post:

Gear Pieces:

  • Lite Battle Belt
  • Chest Rig or Chest Rig / Plate Carrier Combo
  • Daypack
  • Emergency now: concealed carry handgun on belt, throw on Chest Rig to run the rifle.

Basics:

  • Day to day you are probably / should be concealed carrying a handgun. Thus you have options to run a handgun set up, either concealed or overt, on your pants belt. If you have an immediate emergency situation your go-to in this situation is your handgun.
  • If you have time / access (due to location / planning) you then have the option of grabbing your rifle.
  • When you grab your rifle, you need the ability to feed it rifle ammo, which is not contained on your everyday carry belt.
  • Your option to carry rifle magazines should be some combination of chest rig (CR)  / plate carrier (PC).
  • Note that the Lite BB concept does not work well in an emergency every day scenario, simply due to the logistical factor of getting a Lite BB on over an already existing pants-belt EDC handgun load. Thus you skip the Lite BB in this situation, and go straight to the CR/PC rifle option.
  • Don’t try and carry too much on your CR/PC / Lite BB combination: this is where the lite daypack concept comes in. More later.
  • You want to avoid a situation where your gear concept involves a full battle belt, a full chest rig, and a plate carrier, all with big chunky straps, and with too much gear all up. The Lite Battle Belt is deliberately a fairly light piece of equipment, with the CR/PC being the main support item for your rifle. Sustainment and admin items then go in some kind of patrol pack, sized for the situation.

Review of the 3X Special Forces Rig: The Everyday Marksman Blog


gear-logo3


Coming Soon:

Available Soon:

  • All Rigs in Ranger Green.
  • MVT Light Belt: this is designed to fulfill the need for a light battle belt as part of the gear philosophy.
  • Standalone kydex mag pouches: the same as the mag pouches on our rigs, but designed to fit on the Lite Belt, or on a PC.
  • Lite Triple and Lite Quad: these are minimalist chest rigs, nothing but either a 3 or 4 mag kydex shingle, with the ability to attach other mag or admin pouches to the front of the rig.

The above items, mostly available hopefully before Christmas!

Available Later:

  • MVT Silent Plate Carrier. No Velcro!
  • MVT Plate Rig: choose to wear ballistic plate inserts or not in your rig, adapt easily from one to the other.

Current Gear Offerings:

MVT Currently offers several types of Chest Rig for various needs. Our Rigs utilize kydex inserts in the magazine pouches, which allow lighting fast combat reloads, hold the pouch open for easy one handed tactical reloads / return of the magazine to a pouch, and provide excellent retention.

_______________

MVT Patrol Rig:

IMG_0318

 

  • 5.56 (.223) magazine pouches x 6. (Also available in .308)
  • Low profile fit with the 6 x magazine pouches close to the body.
  • Each magazine pouch is supplied with a Kydex insert which both secures the magazine and allows for fast reloads.
  • 3 rows of MOLLE across the rig for maximum versatility.
  • ‘Tuck tab’ design of the admin pouches (sold separately), providing secure closed-top pouches that can be accessed with complete silence – no velcro, buckle, or snap noise
  • 4 adjustable points for a “perfect fit” for almost any body type / shape.
  • H-harness design with “vertical” MOLLE – providing comfort to be worn by itself, or with a backpack.
  • H-Harness is supplied with MOLLE to make the rig hydration carrier compatible.
  • Rear pouch for orienteering style compass.
  • Map / Notebook Pouch on back of rig, overlaying the compass pouch.
  • Antennae loops on the bottom of the rig. By using a flexible antennae extension, you can route the antennae(s) down and under the rig.
  • 1000D Cordura.
  • 100% MADE IN THE USA.

_______________

MVT Responder Rig:

IMG_0458

  • 5.56 (.223) magazine pouches x 4. (Also available in .308)
  • Low profile slim fit with the 4 x magazine pouches close to the body.
  • Each magazine pouch is supplied with a Kydex insert which both secures the magazine and allows for fast reloads.
  • 3 rows of MOLLE across the rig for maximum versatility.
  • Rest of description the same as the Patrol Rig.

_______________

3x Special Forces Rig:

img_0678

The 3X Special Forces Rig was designed in collaboration with SOF personnel, specifically to fill the need for a rig that will comfortably carry the AN/PRC 152 radio. This capability has resulted in two collapsible side pouches that enhance the rig by allowing the carriage of 2 x AN/PRC 152 radios (one each side), or 2 x 5.56 magazines in each radio pouch, or use the pouches for admin items or leave them collapsed. In addition, the front of the radio pouches has four rows of MOLLE, for the attachment of admin pouches are needed.

These specific design features and capabilities have resulted in a rig that is extremely versatile to varying load requirements, and will suit non-military as well as military personnel, whether or not you carry a radio on your gear.

  • Wear the 3X Rig with the supplied h-harness, over a Plate Carrier or standalone.
  • Use the MVT PC Kit (sold separately) to attach the 3X Rig directly to your Plate Carrier.
  • Multiple use options, as an assault panel over a PC, or standalone in ‘recce mode.’
  • The 3X Rig is designed to allow the radio pouches to adjust comfortably across your chest, or if worn over a PC, the radio/mags fit into the space beside your front plate

The 3X Special Forces Rig is well designed and crafted, 100% MADE IN USA, giving you the ability to carry four (4) x 5.56 (.223) magazines in easily accessible magazine pouches. Utilizing kydex retention inserts in the magazine pouches gives excellent magazine retention while allowing for lighting fast reloads. You can plus up the rig to 8 magazines, using the collapsible radio pouches, if you need.

This rig has some outstanding features:

  • 5.56 (.223) magazine pouches with kydex inserts x 4.
  • Low profile slim fit with the 4 x magazine pouches close to the body.
  • Each magazine pouch is supplied with a Kydex insert which both secures the magazine and allows for fast reloads.
  • 3 rows of MOLLE across the rig for maximum versatility.
  • 4 MOLLE wide side panels for the attachment of additional pouches.
  • 2 x collapsible radio/magazine pouches behind the side panels, specifically designed for the AN/PRC 152 radio / 2 x 5.56 magazines.
  • Adjustable elastic/550 cord straps on the radio pouch to secure items of various sizes.
  • Rest of description the same as the Patrol Rig.

Note: For Group / Unit orders of the 3X Special Forces Rig of 10 or more rigs, please do not use the shopping cart, but contact us directly (email: admin@maxvelocitytactical.com). We can give you a 10% discount on the entire order, plus a single shipping quote, rather than having to pay for individual shipping.

_______________

VERSA Chest Rig:

IMG_0394

This well designed and crafted, 100% MADE IN USA chest rig gives you the ability to carry 5.56 (.223) OR 7.62 (.308) magazines in the same rig – all with the simple swapping of a velcro fastened insert. Now you have the option to carry your 5.56 or .308 load-out interchangeably without having to pay for and carry around multiple individual chest rigs! This rig is great for civilians who have both caliber weapons, and also an excellent choice for military and contractors who deploy to other countries, and may operate using a variety of weapon calibers – adapting to the mission’s needs.

This rig has some outstanding features:

  • 5.56 insert with room for 6 magazines, interchangeable,able with:
  • .308 insert with room for 5 magazines.
  • Each magazine pouch is supplied with a Kydex insert which both secures the magazine and allows for fast reloads.
  • The .308 Kydex inserts can be adjusted up and down for an optimal magazine pull with either 20 or 25 round .308 magazines.
  • 3 rows of MOLLE across the rig for maximum versatility.
  • ‘Tuck tab’ design of the admin pouches (sold separately), providing secure closed-top pouches that can be accessed with complete silence – no velcro, buckle, or snap noise
  • Compass pouch on back center of the rig, with dummy cord attachment.
  • Map / Notebook Pouch on back of rig, overlaying the compass pouch.
  • 4 adjustable points for a “perfect fit” for almost any body type / shape.
  • H-harness design with “vertical” MOLLE – providing comfort to be worn by itself, or with a backpack.
  • H-Harness is supplied with MOLLE to make the rig hydration carrier compatible.
  • 1000D Cordura.

_______________

Silent Admin Pouches:

img_0713

In three sizes.

Designed for the MVT line of Chest Rigs, the admin pouches will attach to any MOLLE webbing. An innovative design:

  • ‘Tuck Tab’ method of fastening makes access to and closure of the pouch silent. No velcro.
  • ‘Tuck Tunnel’ design to secure the pouch to MOLLE webbing.
  • Small Pouch dimensions: 6 inches tall, 3.25 inches wide, 1.5 inches deep.
  • 100% MADE IN THE USA.

_______________

PC Attachment Kit:

dscf0336

This will attach any MVT Rig to a Plate Carrier. You can also remove the cummerbund and simply use the PC Kit in place of it. Shown below (with a 3X Rig):

dscf0337


gear-logo3

___

MVT CLASS LIST

___

MVT TRAINING CALENDAR

___

STUDENT REVIEWS

___

book-now-button

___

Sign Up Now